Every precious and big brand watch, there will be many unique, which also bag? The structure, including watchbands watchband of this in the interception, need to understand and to observe carefully, can take and adjust the smooth watchband session.
The most common watchbands, can discharge the strap section is between stud (including casing) or screw connection is desirable, visible. While some strap is more trouble, will appear in the form of loops, also is a ring of a ring, a quarter of a day, belongs to the embedded type.
Often this kind of strap only an export, from this location down after the stud strap, pull out a little extra strap, their day and day, is usually between the axis (with mysterious rail) or connected pieces of combination, watchband outside to look not to come out, must remove the strap bolt meet.
RADO overall ceramic watchbands also is such, should say in the disassembly type and installation of difficulty, sometimes, I recently, bend so as to breakstubborn hand to friends cut a kadeya watchbands, found that it is so.
There is called “La watch of kadeya dona DE Cartier” series, look no case, a bit not circle around, it does not equal the strap every day inside have two horizontal hole, even the standards, the line is connected through the length and mysterious, linked together. (see photo),
The difficulty lies in the control, which benefits, even into position is not easily, the operation is easy, I again slippage of the experience is needed to stay with scotch tape, connected with all the strap section into one, can’t keep them loose, each link between the standards, daub to touch the butter, sticky them, only then can effectively control, the installation can conveniently.
Finally, the strap bolt to pick up, cyclization with a diameter is needed for the QianZi, first temporarily to strap to joggling on, don’t again loose. While the other side with strap itself quickly to wear, stud the strap has obvious bracelets, and thick plate but not control and observation.
Among them, the rest is still a small casing, the casing is through the stud grooves, casing, at the same time, the stud on top of the grooves and casing, must be precise alignment, the only way to watch later stud in use, just wearing a string of guaranteed not.
Small casing is located in the end, watchband discount is that it has been put into the rectification of swings and rectification, bad and how to let the stud smoothly through it? At this moment, or need mentioned above which QianZi suitable diameter, deep and can give it to the lifter, then the opposite strap itself stud to slowly into the pressure. According to mount so much trouble, explain this watchbands in design or ill-judged place.
RSS